Difference between revisions of "Cell Devel Nodes"

Cell Development
Cell Development
Installed	June 2010
Operating System	Linux
Interconnect	Infiniband
Ram/Node	32 Gb
Cores/Node	2 PPU + 16 SPU
Login/Devel Node	cell-srv01 (from login.scinet)
Vendor Compilers	ppu-gcc, spu-gcc

Latest revision as of 00:18, 18 September 2013

NOTE: THIS SYSTEM IS NO LONGER AVAILABLE

The Cell Development nodes are IBM QS22's each with two 3.2GHz "IBM PowerXCell 8i CPU's, where each CPU has 1 Power Processing Unit (PPU) and 8 Synergistic Processing Units (SPU), and 32GB of RAM per node.

Login

First login via ssh with your scinet account at login.scinet.utoronto.ca, and from there you can proceed to arc01 which is currently the gateway machine.

Compile/Devel/Compute Nodes

Cell

You can log into any of 12 nodes blade[03-14] directly to compile/test/run Cell specific or OpenCL codes.

Programming Frameworks

Currently there are two programming frameworks to use. The Cell SDK is the most full featured and "supported" but is architecture specific, whereas the OpenCL should allow code portability to other accelerators (like GP-GPU's) however is from IBM alphaworks so should be considered beta.

OpenCL

Examples are in

/usr/share/doc/OpenCL-0.1-ibm

Cell SDK

Demos, examples, and build details available in

/opt/cell/sdk/

Compilers

NOTE: gcc has been replaced, use ppu-gcc for most cases where gcc whould be used

ppu-gcc -- GNU GCC PPC compiler

spu-gcc -- GNU GCC SPU compiler

xlcl -- IBM XL OpenCL compiler

MPI

Still a work in progress.

Documentation

Cell SDK
- Programming:CBE Programmers Guide,CBE Handbook,CBE Programming Tutorial,CBE PXCell Handbook,Performance Tools Reference,IDE Users Guide
- Libraries:3D FFT,libFFT,ALF,BLAS,SIMD Math API,DaCS,LAPACK,Monte Carlo,SDK Library Examples,SPE Runtime Management, SPE Runtime Migration,SPE Runtime Library Ext.
- Architecure: CBEA,CBEA Public Registers,PPC Book 1,PPC Book 2,PPC Book 3,SPU ISA
- Standards:CBE Linux ABI,Language Extentsions,SIMD Library Specification,SPU ABI Specification,SPU Assembly Language Specification
- Installation: Installation Guide

Cell OpenCL
- OpenCL Guide,

Further Info

IBM Cell Broadband engine tutorials http://publib.boulder.ibm.com/infocenter/ieduasst/stgv1r0/index.jsp

User Codes

Please discuss put any relevant information/problems/best practices you have encountered when using/developing for CELL and/or OpenCL

@@ Line 1: / Line 1: @@
 {{Infobox Computer
-|image=[[Image:University_of_Tor_79284gm-a.jpg|center|300px|thumb]]
+|image=[[Image:300px-Cell_Broadband_Engine_Processor.jpg|center|300px|thumb]]
-|name=Cell Development Cluster
+|name=Cell Development
 |installed=June 2010
 |operatingsystem= Linux
@@ Line 12: / Line 12: @@
 }}
-The Cell Development Cluster is a test cluster with a combination of IBM QS22 Blades that feature the "Cell Broadband Engine".
+''' NOTE: THIS SYSTEM IS NO LONGER AVAILABLE '''
-==Login==
+The Cell Development nodes are IBM QS22's each with two 3.2GHz "IBM PowerXCell 8i CPU's, where each CPU has 1 Power Processing Unit (PPU) and 8 Synergistic Processing Units (SPU), and
+GB of RAM per node.
+===Login===
-First login via ssh with your scinet account at <tt>login.scinet.utoronto.ca</tt>, and from there you can proceed to <tt>cell-srv01</tt> which
+First login via ssh with your scinet account at '''<tt>login.scinet.utoronto.ca</tt>''', and from there you can proceed to '''<tt>arc01</tt>''' which
 is currently the gateway machine.
 ==Compile/Devel/Compute Nodes==
-Currently you can log into any of the 14 nodes <tt>blade01..blade14</tt> directly to compile/test/run your code.
+=== Cell ===
+You can log into any of 12 nodes '''<tt>blade[03-14]</tt>''' directly to compile/test/run Cell
+specific or OpenCL codes.
 ==Programming Frameworks==
-Currently there are two programming frameworks to use.
+Currently there are two programming frameworks to use.  The Cell SDK is the most full featured and "supported" but is architecture specific, whereas the OpenCL should allow code portability to other accelerators (like GP-GPU's) however is from IBM alphaworks so should be considered beta.
 === OpenCL ===
+Examples are in
+<pre>
+/usr/share/doc/OpenCL-0.1-ibm
+</pre>
 === Cell SDK ===
+Demos, examples, and build details available in
+<pre>
+/opt/cell/sdk/
+</pre>
-==Tools==
+===Compilers===
+NOTE: gcc has been replaced, use ppu-gcc for most cases where gcc whould be used
+* '''ppu-gcc''' -- GNU GCC PPC compiler
+* '''spu-gcc''' -- GNU GCC SPU compiler
+* '''xlcl''' -- IBM XL OpenCL compiler
+===MPI===
+Still a work in progress.
+== Documentation ==
+* Cell SDK
+** Programming:[http://support.scinet.utoronto.ca/Manuals/Cell/CBE_Programmers_Guide_v3.1.pdf CBE Programmers Guide],[http://support.scinet.utoronto.ca/Manuals/Cell/CBE_Handbook_v1.1_24APR2007_pub.pdf CBE Handbook],[http://support.scinet.utoronto.ca/Manuals/Cell/CBE_Programming_Tutorial_v3.1.pdf CBE Programming Tutorial],[http://support.scinet.utoronto.ca/Manuals/Cell/CellBE_PXCell_Handbook_v1.11_12May08_pub.pdf CBE PXCell Handbook],[http://support.scinet.utoronto.ca/Manuals/Cell/Performance_Tools_Reference_v3.1.pdf Performance Tools Reference],[http://support.scinet.utoronto.ca/Manuals/Cell/IDE_Users_Guide_v3.1.pdf IDE Users Guide]
+** Libraries:[http://support.scinet.utoronto.ca/Manuals/Cell/3D_FFT_Prog_Guide_and_API_Reference.pdf 3D FFT],[http://support.scinet.utoronto.ca/Manuals/Cell/libFFT_Prog_Guide_API_v3.1.pdf libFFT],[http://support.scinet.utoronto.ca/Manuals/Cell/ALF_Prog_Guide_API_v3.1.pdf ALF],[http://support.scinet.utoronto.ca/Manuals/Cell/BLAS_Prog_Guide_API_v3.1.pdf BLAS],[http://support.scinet.utoronto.ca/Manuals/Cell/CBE_SIMDmath_API_v3.1.pdf SIMD Math API],[http://support.scinet.utoronto.ca/Manuals/Cell/DaCS_Prog_Guide_API_v3.1.pdf DaCS],[http://support.scinet.utoronto.ca/Manuals/Cell/LAPACK_Prog_Guide_API_v3.1.pdf LAPACK],[http://support.scinet.utoronto.ca/Manuals/Cell/Monte_Carlo_Prog_Guide_API_v3.1.pdf Monte Carlo],[http://support.scinet.utoronto.ca/Manuals/Cell/SDK_Example_Library_API_v3.1.pdf SDK Library Examples],[http://support.scinet.utoronto.ca/Manuals/Cell/SPE_Runtime_Management_API_v2.3.pdf SPE Runtime Management], [http://support.scinet.utoronto.ca/Manuals/Cell/SPE_Runtime_Management_Migration_v3.1.pdf SPE Runtime Migration],[http://support.scinet.utoronto.ca/Manuals/Cell/SPU_Runtime_Library_Extensions_v3.1.pdf SPE Runtime Library Ext.]
+** Architecure: [http://support.scinet.utoronto.ca/Manuals/Cell/CBEA_v1.01_3Oct2006.pdf CBEA],[http://support.scinet.utoronto.ca/Manuals/Cell/CBE_Public_Registers.v1_5.02APR2007.pdf CBEA Public Registers],[http://support.scinet.utoronto.ca/Manuals/Cell/PPC_Vers202_Book1_public.pdf PPC Book 1],[http://support.scinet.utoronto.ca/Manuals/Cell/PPC_Vers202_Book2_public.pdf PPC Book 2],[http://support.scinet.utoronto.ca/Manuals/Cell/PPC_Vers202_Book3_public.pdf PPC Book 3],[http://support.scinet.utoronto.ca/Manuals/Cell/SPU_ISA_v1.2_27Jan2007_pub.pdf SPU ISA]
+** Standards:[http://support.scinet.utoronto.ca/Manuals/Cell/CBE_LINUX_ABI_1.2.pdf CBE Linux ABI],[http://support.scinet.utoronto.ca/Manuals/Cell/Language_Extensions_for_CBEA_2.6.pdf Language Extentsions],[http://support.scinet.utoronto.ca/Manuals/Cell/SIMD_Library_Specification_for_CBEA_1.2.pdf SIMD Library Specification],[http://support.scinet.utoronto.ca/Manuals/Cell/SPU_ABI-Specification_1.9.pdf SPU ABI Specification],[http://support.scinet.utoronto.ca/Manuals/Cell/SPU_Assembly_Language_Specification_1.7.pdf SPU Assembly Language Specification]
+** Installation: [http://support.scinet.utoronto.ca/Manuals/Cell/SDK-Installation_Guide_v3.1.pdf Installation Guide]
+* Cell OpenCL
+** [http://support.scinet.utoronto.ca/Manuals/Cell/OpenCL_Guide.pdf OpenCL Guide],
+== Further Info ==
+IBM Cell Broadband engine tutorials http://publib.boulder.ibm.com/infocenter/ieduasst/stgv1r0/index.jsp
+== User Codes ==
+Please discuss put any relevant information/problems/best practices you have encountered when using/developing for CELL and/or OpenCL
+=== MHD ===
+=== CFD ===