BGQ

From oldwiki.scinet.utoronto.ca
Jump to navigation Jump to search
Blue Gene/Q (BGQ)
Blue Gene Cabinet.jpeg
Installed August 2012
Operating System RH6.2, CNK (Linux)
Number of Nodes 2048(32,768 cores), 512 (8,192 cores)
Interconnect 5D Torus (jobs), QDR Infiniband (I/O)
Ram/Node 16 GB
Cores/Node 16 (64 threads)
Login/Devel Node bgqdev-fen1,bgq-fen1
Vendor Compilers bgxlc, bgxlf
Queue Submission Loadleveler


********** BETA TESTING **********

The BGQ is in Beta testing and as such the evironemnt is still under development as is the wiki information contained here.

Support Email

Pleas use bgq-support@scinethpc.ca for BGQ specific inquiries.

Specifications

BGQ is an extremely dense and energy efficient 3rd generation blue gene IBM supercomputer built around a system on a chip compute node that has a 16core 1.6GHz PowerPC based CPU (PowerPC A2) with 16GB of Ram. The nodes are bundled in groups of 32 into a node board (512 cores), and 16 boards make up a midplane (8192 cores) with 2 midplanes per rack, or 16,348 cores and 16 GB of RAM per rack. The compute nodes run a very lightweight linux based operating system called CNK. The compute nodes are all connected together using a custom 5D torus highspeed interconnect. Each rack has 16 I/O nodes that run a full Redhat Linux OS that manages the compute nodes and mounts the filesystem. SciNet has 2 BGQ systems, a half rack 8192 core development system, and a 2 rack 32,768 core production system.

BlueGeneQHardware2.png

5D Torus Network

The network topology of Blue/Gene Q is a five-dimensional (5D) torus, with direct links between the nearest neighbors in the ±A, ±B, ±C, ±D, and ±E directions. As such there are only a few optimum block sizes that will use the network efficiently.

Node Boards Compute Nodes Cores Torus Dimensions
1 32 512 2x2x2x2x2
2 (adjacent pairs) 64 1024 2x2x4x2x2
4 (quadrants) 128 2048 2x2x4x4x2
8 (halves) 256 4096 4x2x4x4x2
16 (midplane) 512 8192 4x4x4x4x2
32 (1 rack) 1024 16384 4x4x4x8x2
64 (2 racks) 2048 32768 4x4x8x8x2

Login/Devel Nodes

The development nodes for the BGQ are bgqdev-fen1 for the half-rack development system and bgq-fen1 for the 2-rack production system. You can login to them from the regular login.scinet.utoronto.ca login nodes or directly using, bgqdev.scinet.utoronto.ca. The nodes are Power7 running Linux which serve as compilation and submission hosts for the BGQ. Programs are cross-compiled for the BGQ on these nodes and then submitted to the queue using loadleveler.

Compilers

The BGQ uses IBM XL compilers to cross-compile code for the BGQ. Compilers are available for FORTRAN, C, and C++. The compilers by default produce static binaries, however with BGQ it is possible to now use dynamic libraries as well. The compilers follow the XL conventions with the prefix bg, so bgxlc and bgxlf are the C and FORTRAN compilers respectively. Most users however will use the MPI variants which are available by loading the mpich2 module.

module load mpich2

Job Submission

As the BGQ architecture is different from the development nodes, the only way to test your program is to submit a job to the BGQ. Jobs are submitted through loadleveler using runjob which in many ways similar to mpirun or mpiexec. As shown above in the network topology overview, there are only a few optimum job size configurations which is also further constrained by each block requiring a minimum of one IO node. In SciNet's configuration (with 8 I/O nodes per midplane) this allows 64 nodes (1024 cores) to be the smallest block size. Normally a block size matches the job size to offer fully dedicated resources to the job. Smaller jobs can be run within the same block however this results in shared resources (network and IO) and are referred to as sub-block jobs and are described in more detail below.

runjob

All BGQ jobs are launced using runjob which for those familiar with MPI is analogous to mpirun/mpiexec. The "block" argument is the predefined group of nodes that have already been configured and booted and when using loadleveler this is set for you. For this example block R00-M0-N03-64 is made up of 2 node cards with 64 compute nodes (1024 cores). To run a job with 16 tasks/node and 1024 total tasks the following command is used.

runjob --block BLOCK_ID --ranks-per-node=16 --np 1024 --cwd=$PWD : $PWD/code -f file.in

runjob flags are shown with

runjob -h

a particularly useful on is

--verbose #

where # is from 1-7 which can be helpful in debugging an application.

Batch Jobs

Job submission is done through loadleveler with a few blue gene specific commands. The command "bg_shape" is in number of nodes, not cores, so a bg_shape=32 would be 512 cores.

#!/bin/sh
# @ job_name           = bgsample
# @ job_type           = bluegene
# @ comment            = "BGQ Job By Size"
# @ error              = $(job_name).$(Host).$(jobid).err
# @ output             = $(job_name).$(Host).$(jobid).out
# @ bg_size            = 32
# @ wall_clock_limit   = 30:00
# @ bg_connectivity    = Torus
# @ queue 

# Launch all BGQ jobs using runjob
export OMP_NUM_THREADS=1

runjob --np 512 --ranks-per-node=16 --cwd=$SCRATCH/ : $HOME/mycode.exe myflags

To submit to the queue use

llsubmit myscript.sh

to see running jobs

llq -b

to cancel a job use

llcancel JOBID

and to look at details of the bluegene resources use

llbgstatus

Interactive jobs

As BGQ codes are cross-compiled they cannot be run direclty on the front-nodes. Users however only have access to the BGQ through loadleveler which is appropriate for batchjobs, however an interactive session is typically beneficial when debugging and developing. As such a script has been written to allow a session in which runjob can be run interactively. The script uses loadleveler to setup a block and set all the correct environment variables and then launch a spawned shell on the front-end node. The bgqi session currently allows a 30 minute session on 64 nodes.

[user@bgqdev-fen1]$ bgqi

[user@bgqdev-fen1]$ runjob : my_code

[user@bgqdev-fen1]$ exit

NOTE: This is a prototype script so be gentle

Sub-block jobs

BGQ allows sub-block jobs, however this would need to be done from within the same loadleveler submission scripts using multiple calls to runjob. To run a sub-block job (ie share a block) you need to specify a "--corner" within the block to start the job and a 5D AxBxCxDxE "--shape". The following example shows 2 jobs sharing the same block.

runjob --block R00-M0-N03-64 --corner R00-M0-N03-J00 --shape 1x1x1x2x2 --ranks-per-node=16 --np 64 --cwd=$PWD : $PWD/code -f file.in
runjob --block R00-M0-N03-64 --corner R00-M0-N03-J04 --shape 2x2x2x2x1 --ranks-per-node=16 --np 256 --cwd=$PWD : $PWD/code -f file.in

Filesystem

The BGQ has its own dedicated 500TB GPFS filesystem for both $HOME and $SCRATCH.


Documentation

Julich Documentation

BGQ System Administration Guide

BGQ Application Development