Phi

From oldwiki.scinet.utoronto.ca
Jump to navigation Jump to search
Intel Xeon Phi / NVIDIA Tesla K20
Xeon phi.jpg
NVIDIA-Tesla-K20X.jpg
Installed April 2013
Operating System Linux Centos 6.4
Number of Nodes 1
Interconnect DDR Infiniband
Ram/Node 32 GB
Cores/Node 8 with Xeon Phi & K20
Login/Devel Node arc09 (from arc01)
Vendor Compilers nvcc,pgcc,icc,gcc
Queue Submission none

This is a single test/devel node, part of the Accelerator Research Cluster, for investigating new accelerator technologies. It consists of a single x86_64 node with one 8-core Intel Sandybridge Xeon E5-2650 2.0GHz CPU with 32GB of RAM. It has a single NVIDIA Tesla K20 GPU with CUDA Capability 3.0 (Kepler) with 2496 CUDA Cores and 5 GB of RAM as well as a single Intel Xeon Phi 3120A with 57 1.1 GHz cores and 6GB of RAM. The node is interconnected to the rest of the clusters with DDR Infiniband and mounts the regular SciNet GPFS filesystems.

Login

First login via ssh with your scinet account at login.scinet.utoronto.ca, and from there you can proceed to arc01. Access to this machines is not enabled be default so please email support@scinet.utoronto.ca for access.

Queue

To access the node you need to use the queue, similar to the standard ARC and GPC compute nodes, however with a maximum walltime of 4 hours.

For an interactive job use

qsub -l nodes=1:ppn=8,walltime=48:00:00 -q arcx -I

Devel/Compute

As this is a single node there is no queue and users are expected to use it in a "friendly" manner. This system is not setup for production usage, and primarily for investigating new technologies so please keep your run times short.

Software

The same software installed on the GPC is available on arc09 using the modules framework. See here for full details.

NVIDIA Tesla K20

See the ARC wiki page for full details of the available CUDA and OpenCL compilers and modules. To use all the K20 (Kepler) features a minimum of CUDA 5.0 is required.

CUDA

module load cuda/5.0

Driver Version

The current NVIDIA driver version for the K20 is 310.44

Xeon Phi

Compilers

The Xeon Phi uses the standard intel compilers, however requires at least version 13.0

module load intel/13.1.1

Tools

The Intel Cluters Tools such as vtune amplifier and inspector are available for the Xeon Phi by loading the following modules.

module load inteltools

OpenCL

OpenCL version 1.2 is available for the Xeon Phi on <ttt>arc09</ttt>

/opt/intel/opencl

Direct Access

The Xeon Phi can be accessed directly by

ssh mic0

Shared Filesystem

The host node arc09 mounts the standard SciNet filesystems, i.e. $HOME and $SCRATCH, however to share files between the host and Xeon Phi use /localscratch/$HOME