High Performance Storage System

(Pilot usage phase to started in Jun/2011 with a select group of users. Instructions on this wiki are still a work in progress)

The High Performance Storage System (HPSS) is a tape-backed hierarchical storage system that will provide a significant portion of the allocated storage space at SciNet. It is a repository for archiving data that is not being actively used. Data can be returned to the active GPFS filesystem when it is needed.

Access and transfer of data into and out of HPSS is done under the control of the user, whose interaction is expected to be scripted and submitted as a batch job, using one or more of the following utilities:

HSI is a client with an ftp-like functionality which can be used to archive and retrieve large files. It is also useful for browsing the contents of HPSS.
HTAR is a utility that creates tar formatted archives directly into HPSS. It also creates a separate index file (.idx) that can be accessed and browsed quickly.
ISH is a TUI utility that can perform an inventory of the files and directories in your tarballs.

Why should I use and trust HPSS?

10+ years history, used by 50+ facilities in the “Top 500” HPC list
very reliable, data redundancy and data insurance built-in.
highly scalable, reasonable performance at SciNet - Ingest: ~12 TB/day, Recall: ~24 TB/day (aggregated)
HSI/HTAR clients also very reliable and used on several HPSS sites. ISH was written at SciNet.
HPSS fits well with the Storage Capacity Expansion Plan at SciNet (pdf presentation)

Guidelines

Expanded storage capacity is provided on tape -- a media that is not suited for storing small files. Files smaller than ~200MB should be grouped into tarballs with tar or htar.
Optimal performance for aggregated transfers and allocation on tapes is obtained with tarballs of size around 100GB.
We strongly urge that you use the sample scripts we are providing as the basis for your job submissions
Make sure to check the application's exit code and returned logs for errors after any data transfer or tarball creation process
Pilot users: DURING THE TESTING PHASE DO NOT DELETE THE ORIGINAL FILES FROM /scratch OR /project

Access Through the Queue System

All access to the archive system is done through the GPC queue system.

Scripted File Transfers

File transfers in and out of the HPSS should be scripted into jobs and submitted to the archive queue. See generic example below. <source lang="bash">

!/bin/bash
PBS -q archive
PBS -N htar_create_tarball_in_hpss
PBS -j oe
PBS -m e

echo "Creating a htar of finished-job1/ directory tree into HPSS"

trap "echo 'Job script not completed';exit 129" TERM INT

Note that your initial directory in HPSS will be /archive/$(id -gn)/$(whoami)/

cd /scratch/$(whoami)/workarea/ htar -cf /archive/$(id -gn)/$(whoami)/finished-job1.tar finished-job1/ status=$?

trap - TERM INT

if [ ! $status == 0 ]; then

  echo 'HTAR returned non-zero code.'
  /scinet/gpc/bin/exit2msg $status
  exit $status

else

  echo 'TRANSFER SUCCESSFUL'

fi </source> Note: Always trap the execution of your jobs for abnormal terminations, and be sure to return the exit code

The status of pending jobs can be monitored with showq specifying the archive queue:

showq -w class=archive

Job Dependencies

Typically data will be recalled to /scratch when it is needed for analysis. Job dependencies can be constructed so that analysis jobs wait in the queue for data recalls before starting. The qsub flag is

-W depend=afterok:<JOBID>

where JOBID is the job number of the archive recalling job that must finish successfully before the analysis job can start.

Here is a short cut for generating the dependency (lookup data-recall.sh samples):

gpc04 $ qsub $(qsub data-recall.sh | awk -F '.' '{print "-W depend=afterok:"$1}') job-to-work-on-recalled-data.sh

HTAR

Please aggregate small files (<~200MB) into tarballs or htar files.

HTAR is a utility that is used for aggregating a set of files and directories, by using a sophisticated multithreaded buffering scheme to write files directly from GPFS into HPSS, creating an archive file that conforms to the POSIX TAR specification, thereby achieving a high rate of performance. HTAR does not do gzip compression, however it already has a built-in checksum algorithm.

Caution

Files larger than 68 GB cannot be stored in an HTAR archive, and this is the only known draw back. If you attempt to start a transfer with any files larger than 68GB the whole HTAR session will fail, and you'll get a notification listing all those files, so that you can transfer them with HSI.
Check the HTAR exit code and log file before removing any files from the GPFS active filesystems.

HTAR Usage

To write the file1 and file2 files to a new archive called files.tar in the default HPSS home directory, enter:

    htar -cf files.tar file1 file2
OR
    htar -cf /archive/$(id -gn)/$(whoami)/files.tar file1 file2

To write a subdirA to a new archive called subdirA.tar in the default HPSS home directory, enter:

    htar -cf subdirA.tar subdirA

To extract all files from the archive file called proj1.tar in HPSS into the project1/src directory in GPFS, and use the time of extraction as the modification time, enter:

    htar -xm -f proj1.tar project1/src

To display the names of the files in the out.tar archive file within the HPSS home directory, enter (the out.tar.idx file will be queried):

    htar -vtf out.tar

For more details please check the HTAR - Introduction or the HTAR Man Page online

Sample tarball create

!/bin/bash
PBS -q archive
PBS -N htar_create_tarball_in_hpss
PBS -j oe
PBS -m e

trap "echo 'Job script not completed';exit 129" TERM INT

Note that your initial directory in HPSS will be /archive/$(id -gn)/$(whoami)/

cd /scratch/$(whoami)/workarea/ htar -cf /archive/$(id -gn)/$(whoami)/finished-job1.tar finished-job1/ status=$?

trap - TERM INT

if [ ! $status == 0 ]; then

  echo 'HTAR returned non-zero code.'
  /scinet/gpc/bin/exit2msg $status
  exit $status

else

  echo 'TRANSFER SUCCESSFUL'

fi </source>

Note: If you attempt to start a transfer with any files larger than 68GB the whole HTAR session will fail, and you'll get a notification listing all those files, so that you can transfer them with HSI.

----------------------------------------
INFO: File too large for htar to handle: finished-job1/file1 (86567185745 bytes)
INFO: File too large for htar to handle: finished-job1/file2 (71857244579 bytes)
ERROR: 2 oversize member files found - please correct and retry
ERROR: [FATAL] error(s) generating filename list 
HTAR: HTAR FAILED
###WARNING  htar returned non-zero exit status

Sample tarball list

!/bin/bash
PBS -q archive
PBS -N htar_list_tarball_in_hpss
PBS -j oe
PBS -m e

trap "echo 'Job script not completed';exit 129" TERM INT

Note that your initial directory in HPSS will be /archive/$(id -gn)/$(whoami)/

htar -tvf /archive/$(id -gn)/$(whoami)/finished-job1.tar status=$?

trap - TERM INT

if [ ! $status == 0 ]; then

  echo 'HTAR returned non-zero code.'
  /scinet/gpc/bin/exit2msg $status
  exit $status

else

  echo 'TRANSFER SUCCESSFUL'

fi </source>

Sample tarball extract

!/bin/bash
PBS -q archive
PBS -N htar_extract_tarball_from_hpss
PBS -j oe
PBS -m e

trap "echo 'Job script not completed';exit 129" TERM INT

Note that your initial directory in HPSS will be /archive/$(id -gn)/$(whoami)/

cd /scratch/$(whoami)/recalled-from-hpss htar -xmf /archive/$(id -gn)/$(whoami)/finished-job1.tar status=$?

trap - TERM INT

if [ ! $status == 0 ]; then

  echo 'HTAR returned non-zero code.'
  /scinet/gpc/bin/exit2msg $status
  exit $status

else

  echo 'TRANSFER SUCCESSFUL'

fi </source>

HSI

HSI is the primary client with which a user will interact with HPSS. It provides an ftp-like interface for archiving and retrieving tarballs or directory trees. In addition it provides a number of shell-like commands that are useful for examining and manipulating the contents in HPSS. The most commonly used commands will be:

cput	Conditionally stores a file only if the file does not already exist in HPSS cput [options] GPFSpath [: HPSSpath]
cget	Conditionally retrieves a copy of a file from HPSS to GPFS only if a local copy does not already exist. cget [options] [GPFSpath :] HPSSpath
cd,mkdir,ls,rm,mv	Operate as one would expect on the contents of HPSS.
lcd,lls	Local commands to GPFS

There are 3 distinctions about HSI that you should keep in mind, and that can generate a bit of confusion when you're first learning how to use it:
- HSI doesn't currently support renaming directories during transfers on-the-fly, therefore the syntax for cput/cget may not work as one would expect in some scenarios, requiring some workarounds.
- HSI has an operator ":" which separates the GPFSpath and HPSSpath, and must be surrounded by whitespace (one or more space characters)
- The order for referring to files in HSI syntax is different from FTP. In HSI the general format is always the same, GPFS first, HPSS second, cput or cget:

     GPFSfile : HPSSfile

For example, when using HSI to store the tarball file from GPFS into HPSS, then recall it to GPFS, the following commands could be used:

    cput tarball-in-GPFS : tarball-in-HPSS
    cget tarball-recalled : tarball-in-HPSS

unlike with FTP, where the following syntax would be used:

    put tarball-in-GPFS tarball-in-HPSS 
    get tarball-in-HPSS tarball-recalled

Simple commands can be executed on a single line.

    hsi "mkdir LargeFilesDir; cd LargeFilesDir; cput tarball-in-GPFS : tarball-in-HPSS"

More complex sequences can be performed using an except such as this:

    hsi <<EOF
      mkdir LargeFilesDir
      cd LargeFilesDir
      cput tarball-in-GPFS : tarball-in-HPSS
      lcd /scratch/$(whoami)/LargeFilesDir2/
      cput -Rup *  
    end
    EOF

The commands below are equivalent, but we recommend that you always use full path, and organize the contents of HPSS (the default HSI directory placement is /archive/$(id -gn)/$(whoami)/:

    hsi cput tarball
    hsi cput tarball : tarball
    hsi cput /scratch/$(whoami)/tarball : /archive/$(id -gn)/$(whoami)/tarball

There are no known issues renaming files on-the-fly:

    hsi cput /scratch/$(whoami)/tarball1 : /archive/$(id -gn)/$(whoami)/tarball2
    hsi cget /scratch/$(whoami)/tarball3 : /archive/$(id -gn)/$(whoami)/tarball2

There are no issues transferring directory trees all their contents recursively (as in rsync), provided that you keep the same directory name on GPFS and HPSS. You may use '-u' option to resume a previously disrupted session, and the '-p' to preserve ACL's

   hsi cput /scratch/$(whoami)/LargeFilesDir : /archive/$(id -gn)/$(whoami)/LargeFilesDir
OR
   hsi cget /scratch/$(whoami)/LargeFilesDir : /archive/$(id -gn)/$(whoami)/LargeFilesDir

However the syntax forms below will fail.

   hsi cput -Rup /scratch/$(whoami)/LargeFilesDir : /archive/$(id -gn)/$(whoami)/LargeFilesDir2    (FAILS)
OR
   hsi cput -Rup /scratch/$(whoami)/LargeFilesDir/* : /archive/$(id -gn)/$(whoami)/LargeFilesDir2  (FAILS)

One workaround is the following 2-steps process:

   hsi cput -Rup /scratch/$(whoami)/LargeFilesDir : /archive/$(id -gn)/$(whoami)/LargeFilesDir 
   hsi mv /archive/$(id -gn)/$(whoami)/LargeFilesDir /archive/$(id -gn)/$(whoami)/LargeFilesDir2

Another workaround is do a "cd" in GPFS first:

   lcd GPFSpath, cget -R ...

    hsi <<EOF
      lcd /scratch/$(whoami)/LargeFilesDir
      mkdir /archive/$(id -gn)/$(whoami)/LargeFilesDir2
      cd /archive/$(id -gn)/$(whoami)/LargeFilesDir2
      cput -Rup *  
    end
    EOF

Documentation

Complete documentation on HSI is available from the Gleicher Enterprises links below. You may peruse those links and come with alternative syntax forms. You may even be already familiar with HPSS/HSI from other HPC facilities, that may or not have procedures similar to ours. HSI doesn't always work as expected when you go outside of our recommended syntax, so we strongly urge that you use the sample scripts we are providing as the basis for your job submissions

Note: HSI returns the highest-numbered exit code, in case of multiple operations in the same hsi session. You may use '/scinet/gpc/bin/exit2msg $status' to translate those codes into intelligible messages

Typical Usage Scripts

The most common interactions will be putting data into HPSS, examining the contents (ls,ish), and getting data back onto GPFS for inspection or analysis.

Sample data offload

!/bin/bash

This script is named: data-offload.sh

PBS -q archive
PBS -N offload
PBS -j oe
PBS -me

trap "echo 'Job script not completed';exit 129" TERM INT

individual tarballs already exist

/usr/local/bin/hsi -v <<EOF1 mkdir put-away cd put-away cput /scratch/$(whoami)/workarea/finished-job1.tar.gz : finished-job1.tar.gz end EOF1 status=$? if [ ! $status == 0 ];then

  echo 'HSI returned non-zero code.'
  /scinet/gpc/bin/exit2msg $status
  exit $status

else

  echo 'TRANSFER SUCCESSFUL'

fi

/usr/local/bin/hsi -v <<EOF2 mkdir put-away cd put-away cput /scratch/$(whoami)/workarea/finished-job2.tar.gz : finished-job2.tar.gz end EOF2 status=$? if [ ! $status == 0 ];then

  echo 'HSI returned non-zero code.'
  /scinet/gpc/bin/exit2msg $status
  exit $status

else

  echo 'TRANSFER SUCCESSFUL'

fi

trap - TERM INT </source>

Note: as in the above example, we recommend that you capture the (highest-numbered) exit code for each hsi session independently. And remember, you may improve your exit code verbosity by adding the excerpt below to your scripts: <source lang="bash"> if [ ! $status == 0 ];then

  echo 'HSI returned non-zero code.'
  /scinet/gpc/bin/exit2msg $status
  exit $status

else

  echo 'TRANSFER SUCCESSFUL'

fi </source>

Sample data list

A very trivial way to list the contents of HPSS would be to just submit the HSI 'ls' command. <source lang="bash">

!/bin/bash

This script is named: data-list.sh

PBS -q archive
PBS -N hpss_ls
PBS -j oe
PBS -me

/usr/local/bin/hsi -v <<EOF cd put-away ls -R end EOF </source>

However, we provide a much more useful and convenient way to explore the contents of HPSS with the inventory shell ISH. This example creates an index of all the files in a user's portion of the namespace. The list is placed in the directory /home/$(whoami)/.ish_register that can be inspected from the gpc-devel nodes. <source lang="bash">

!/bin/bash

This script is named: data-list.sh

PBS -q archive
PBS -N hpss_index
PBS -j oe
PBS -me

INDEX_DIR=$HOME/.ish_register if ! [ -e "$INDEX_DIR" ]; then

 mkdir -p $INDEX_DIR

fi

export ISHREGISTER="$INDEX_DIR" ish hindex </source>

This index can be browsed or searched with ISH on the development nodes. <source lang="bash"> gpc-f104n084-$ ish ~/.ish_register/hpss.igz [ish]hpss.igz> help </source>

ISH is a powerful tool that is also useful for creating and browsing indices of tar and htar archives, so please look at the documentation or built in help.

Sample data recall

!/bin/bash

This script is named: data-recall.sh

PBS -q archive
PBS -N recall_files
PBS -j oe
PBS -me

trap "echo 'Job script not completed';exit 129" TERM INT

mkdir -p /scratch/$(whoami)/recalled-from-hpss

individual tarballs previously organized in HPSS inside the put-away-on-2010/ folder

hsi -v << EOF cget /scratch/$(whoami)/recalled-from-hpss/Jan-2010-jobs.tar.gz : /archive/$(id -gn)/$(whoami)/put-away-on-2010/Jan-2010-jobs.tar.gz cget /scratch/$(whoami)/recalled-from-hpss/Feb-2010-jobs.tar.gz : /archive/$(id -gn)/$(whoami)/put-away-on-2010/Feb-2010-jobs.tar.gz end EOF status=$?

trap - TERM INT

if [ ! $status == 0 ]; then

  echo 'HSI returned non-zero code.'
  /scinet/gpc/bin/exit2msg $status
  exit $status

else

  echo 'TRANSFER SUCCESSFUL'

fi </source>

We should emphasize that a single cget of multiple files (rather than several separate gets) allows HSI to do optimization, as in the following example: <source lang="bash">

!/bin/bash

This script is named: data-recall.sh

PBS -q archive
PBS -N recall_files_optimized
PBS -j oe
PBS -me

trap "echo 'Job script not completed';exit 129" TERM INT mkdir -p /scratch/$(whoami)/recalled-from-hpss

individual tarballs previously organized in HPSS inside the put-away-on-2010/ folder

hsi -v << EOF lcd /scratch/$(whoami)/recalled-from-hpss/ cd /archive/$(id -gn)/$(whoami)/put-away-on-2010/ cget Jan-2010-jobs.tar.gz Feb-2010-jobs.tar.gz end EOF status=$?

trap - TERM INT

if [ ! $status == 0 ]; then

  echo 'HSI returned non-zero code.'
  /scinet/gpc/bin/exit2msg $status
  exit $status

else

  echo 'TRANSFER SUCCESSFUL'

fi </source>

Sample transferring directories

Remember, it's not possible to rename directories on-the-fly:

hsi cget -Rup /scratch/$(whoami)/LargeFiles-recalled : /archive/$(id -gn)/$(whoami)/LargeFiles    (FAILS)

The workaround is: <source lang="bash">

!/bin/bash

This script is named: data-recall.sh

PBS -q archive
PBS -N recall_directories
PBS -j oe
PBS -me

trap "echo 'Job script not completed';exit 129" TERM INT

mkdir -p /scratch/$(whoami)/LargeFiles-recalled

hsi -v << EOF lcd /scratch/$(whoami)/LargeFiles-recalled cd /archive/$(id -gn)/$(whoami)/LargeFiles cget -Rup * end EOF status=$?

trap - TERM INT

if [ ! $status == 0 ]; then

  echo 'HSI returned non-zero code.'
  /scinet/gpc/bin/exit2msg $status
  exit $status

else

  echo 'TRANSFER SUCCESSFUL'

fi </source>

Sample verify checksum

!/bin/bash
PBS -q archive
PBS -N checksum_verified_transfer
PBS -j oe
PBS -me

thefile=<GPFSpath> storedfile=<HPSSpath>

Generate checksum on fly using a named pipe so that file is only read from GPFS once

mkfifo /tmp/NPIPE cat $thefile | tee /tmp/NPIPE | hsi -q put - : $storedfile & pid=$! md5sum /tmp/NPIPE |tee /tmp/$fname.md5 rm -f /tmp/NPIPE

Check the exit code of the HSI process

wait $pid status=$?

if [ ! $status == 0 ]; then

  echo 'HSI returned non-zero code.'
  /scinet/gpc/bin/exit2msg $status
  exit $status

else

  echo 'TRANSFER SUCCESSFUL'

fi

change filename to stdin in checksum file

sed -i.1 "s+/tmp/NPIPE+-+" /tmp/$fname.md5

verify checksum

hsi -q get - : $storedfile | md5sum -c /tmp/$fname.md5 status=$?

if [ ! $status == 0 ]; then

  echo 'HSI returned non-zero code.'
  /scinet/gpc/bin/exit2msg $status
  exit $status

else

  echo 'TRANSFER SUCCESSFUL'

fi </source>

For more details please check the HSI Introduction, the HSI Man Page or the or the hsi help

HPSS

Contents

High Performance Storage System

Why should I use and trust HPSS?

Guidelines

Access Through the Queue System

Scripted File Transfers

Job Dependencies

HTAR

HTAR Usage

Sample tarball create

Sample tarball list

Sample tarball extract

HSI

Documentation

Typical Usage Scripts

Sample data offload

Sample data list

Sample data recall

Sample transferring directories

Sample verify checksum

Navigation menu

Search