GPU Devel Nodes

From oldwiki.scinet.utoronto.ca
Revision as of 15:40, 9 November 2012 by Rzon (talk | contribs)
Jump to navigation Jump to search
GPU Development Cluster
Tesla S2070 3qtr.gif
Installed April 2011
Operating System Linux Centos 6.0
Number of Nodes 8
Interconnect DDR Infiniband
Ram/Node 48 Gb
Cores/Node 8 with 2xGPUs
Login/Devel Node arc01 (from login.scinet)
Vendor Compilers nvcc,pgcc,icc,gcc
Queue Submission Torque

The GPU cluster, part of the Accelerator Research Cluster, consists of 8 x86_64 nodes each with two quad core Intel Xeon X5550 2.67GHz CPUs with 48GB of RAM per node. Each node has two NVIDIA Tesla M2070 GPUs with CUDA Capability 2.0 (Fermi) each with 448 CUDA Cores @ 1.15GHz and 6 GB of RAM. The nodes are interonnected with DDR Infiniband for MPI communications and disk I/O to the SciNet GPFS filesystems. In total this cluster contains 64 x86_64 cores with 384 GB of system RAM and 16 GPUs with 96 GB GPU RAM total.

Note that SciNet has a mailing lists for people interested in GPGPU computing. To receive information on courses, workshop and other GPGPU related events, sign up at https://support.scinet.utoronto.ca/mailman/listinfo/scinet-gpgpu.

Nodes

Login

First login via ssh with your scinet account at login.scinet.utoronto.ca, and from there you can proceed to arc01 which is the GPU development node.

Access to these machines is currently controlled. Please email support@scinet.utoronto.ca for access.

Devel

As mentioned arc01 is the head/develop node for interactive use. This node is for compiling, short testing, and submitting batch jobs to the compute nodes. It is a shared resource so treat it accordingly and use the queue and compute nodes for long are large computations.

Compute

To access the other 7 compute nodes with GPU's you need to use the queue, similar to the standard GPC compute nodes. Currently the nodes are scheduled by complete node, 8 cores and 2 GPUs, and a maximum walltime of 48 hours.

For an interactive job use

qsub -l nodes=1:ppn=8:gpus=2,walltime=48:00:00 -q arc -I

or for a batch job use

qsub script.sh -q arc

where script.sh is <source lang="bash">

  1. !/bin/bash
  2. Torque submission script for SciNet ARC
  3. PBS -l nodes=2:ppn=8:gpus=2,walltime=1:00:00
  4. PBS -N GPUtest

cd $PBS_O_WORKDIR

  1. EXECUTION COMMAND; -np = nodes*ppn

mpirun -np 16 ./a.out </source>

To check running jobs on the gpu nodes only use

showq -w class=arc

Software

The same software installed on the GPC is available on ARC using the same modules framework. See here for full details.

Programming Frameworks

Currently there are four programming frameworks to use: NVIDIA's CUDA framework, PGI's CUDA Fortran, PGI's implementation of OpenACC, or OpenCL.

NVIDIA toolkit

CUDA

The current installed CUDA Toolkits are 3.2, 4.0, 4.1 (default), and 4.2. To use 4.0 just add the following module

module load cuda/4.0

Note that to use the full 6GB or memory per GPU, CUDA 3.2 or newer must be used.

The CUDA driver is installed locally, however the CUDA Toolkits are installed in.

/scinet/arc/cuda-$VERSION/

The environment variable $SCINET_CUDA_INSTALL is set when a cuda module is loaded and it points to the install location. This is useful when setting up makefiles and if you use the NVIDIA_SDK build evironment, modify the NVIDIA_SDK/C/common/common.mk file accordingly.

CUDA_INSTALL_PATH = $SCINET_CUDA_INSTALL 

The Nvidia cuda compiler (which uses gcc/4.4.6 by default for CUDA < 4.1, while cuda/4.2 uses gcc/4.6.1), is called nvcc,

You'll have to let the cuda compiler know about the capabilities of the Fermi graphics card by supplying the flag

-arch=sm_13

or

-arch=sm_20

NVIDIA Toolkit

The latest CUDA SDK can be copied into your home directory from:

/scinet/arc/src/gpucomputingsdk_4.0.13_linux.run

NOTE: Not all of the CUDA and OpenCL examples will compile as many require OpenGL graphic libraries not installed on the nodes.

OpenCL

As of 3.0, OpenCL is included in the CUDA Toolkit so loading the CUDA module is all that is required.

PGI compilers

As of July 2012, The PGI suite of compilers is installed on the ARC. These can be accessed by

$  module load gcc/4.6.1 pgi/12.6

(if you use the older pgi/12.5, gcc/4.4.6 is a requirement, and is used, for instance, in the CUDA parts of the PGI compilers). These compilers use their own cuda installation, so you do not need to load an additional cuda module. By default, they use a cuda 4.1 installation, but you can request cuda 4.2 as well using the -Mcuda=4.2 option.

The compilation commands are pgcc, pgcpp and pgfortran for c, c++ and fortran, respectively. As usual, we advice to compiler with optimization using the flags

-O4 -fastsse

The compilers will then optimize for the specific machine that you are compiling on.

The PGI compilers support OpenMP as well through the compile and link flags

-mp

CUDA Fortran

The PGI fortran compiler (pgfortran, also pgf77 and pgf90) understands CUDA extensions to fortran. This compiler will automatically understand these extension for source files with the file extension .cuf Otherwise, you have to specify

-Mcuda=4.1

OpenACC

OpenACC is a compiler-directive approach to GPGPU programming. The PGI compilers (c, c++ and fortran) have a partial implementation of this open specification. To switch this on, use the options

-acc -ta=nvidia -Mcuda=4.1

More documentation

Manuals are on the Tutorials and Manuals page.

Other compilers

  • gcc,g++,gfortran - GNU compiler (nvcc need to have either gcc-4.4 or gcc-4.6 module loaded to work correctly)
  • icc,icpc,ifort - Intel compiler

Debuggers

  • cuda-gdb - Nvidia text based gdb variant, part of the cuda module.
  • ddt - Allinea's graphical DDT debugger, in the ddt module. The most recent version, ddt 3.2.1, has support for cuda 4.2.

Note that to debug both host and cuda device code, you have to give the

-g -G

pair of flags to nvcc.

MPI

The GPC MPI packages can be used on this system. See the GPC section on MPI for more details.

While these mpi packages should work with the PGI compilers as well, this has not been tested and standard wrappers like mpif90 may not work.

Alternatively, for mpi compilations with the PGI compilers, you can load the mpich1 mpi implementation with

module load mpich1/pgi

after which you can use the option

-Mmpi

or the wrapper scripts mpicc, mpiCC and mpif90, as well as mpirun.

Driver Version

The current NVIDIA driver version installed is 295.41.

Documentation

  • CUDA
    • google "CUDA"
  • OpenCL
    • see above

Further Info

User Codes

Please discuss and put any relevant information/problems/best practices you have encountered when using/developing for CUDA and/or OpenCL